Industrial Drones · Confined-Space Inspection
The interiors of storage tanks, vessel compartments and industrial containers often have limited space, complex structures and insufficient lighting.
Traditional inspection methods may require personnel to enter and complete the inspection by taking photographs, observing conditions and recording findings manually. In some high-risk environments or areas that are difficult to access, industrial inspection needs to address how to reduce personnel entry while obtaining clear, complete images of the interior.
Can an industrial drone enter these spaces instead of personnel and carry out an internal visual inspection?
The Scout 137 Gen3 tethered industrial drone system from Norway's ScoutDI is designed for precisely these inspection needs in confined spaces and indoor industrial facilities.
01 The Drone Enters While Personnel Remain Outside
Scout 137 Gen3 uses a tethered design. Operators remain outside and control the drone as it enters the target space to carry out an internal inspection.
Equipped with a high-definition camera system, the drone can enter areas that are difficult to reach through traditional manual inspection and capture images of internal structures and equipment surfaces.
Under suitable operating conditions, this approach can reduce the need for personnel to enter confined spaces and lower the likelihood of their exposure to high-risk working environments.

Scout 137 Gen3 operating inside a tank, with continuous power supplied through its tether
02 High-Definition Imaging and Lighting to Record the Interior
Confined spaces often have insufficient lighting, and some areas also offer limited viewing angles.
Scout 137 Gen3's imaging and lighting configuration focuses on several aspects:
Imaging and Lighting Configuration
- A 4K camera with 3.5× optical zoom and autofocus
- Six LED lighting panels
- A luminous flux of more than 12,000 lumens
- Support for multiple lighting modes
The equipment also uses a two-axis gimbal with an adjustable tilt angle, allowing the camera direction to be adapted to inspection needs.
By combining high-definition imaging, optical zoom and high-intensity lighting, operators can observe and record internal structures, surface conditions and areas of particular interest, providing images for subsequent inspection analysis.
03 3D Spatial Data to Record Location
In addition to capturing images and video, Scout 137 Gen3 carries survey-grade 3D LiDAR and uses LiDAR/SLAM technology to collect spatial data.
During inspection, the system can generate a real-time 3D point cloud and record the drone's flight path and points of interest (POI).
Combining images with spatial location information helps inspectors understand the actual locations represented in the images during subsequent review, improving the traceability of inspection records.

Real-time point cloud and flight path, linking images to specific locations
04 From On-Site Inspection to Digital Records
After an inspection, the images, 3D models, flight paths and inspection markers can be viewed, replayed and analysed through Scout Portal.
Data collected on site can be further organised, shared and compiled into inspection reports, providing a reference for subsequent equipment maintenance and condition assessment.
From drone entry and image capture to spatial data recording, Scout 137 Gen3 provides a more flexible digital approach to confined-space inspection.
Tecway can provide Scout 137 Gen3 industrial drone equipment sales, operator training and professional inspection services to meet customers' different needs for in-house inspections or commissioned inspections. Please contact Tecway if you have related requirements.

